Bike Racks are excellent equipment for transporting your favorite bike to places on a road trip or bike trekking. But not knowing how to install a bike rack properly can cause your car or bike to face accidents.
Installing a bike rack on the back of your car requires minimal special tools and accessories. It works like the “plug and plays” method for some models. But you need to know some primary installing sequences because all racks are not the same.
Depending upon the brands and manufacturing company, the installation procedure is different.
There are basically three types of bike racks used on cars and SUVs. They are hitch-mounted bike racks, trunk-mounted bike racks, and roof-mounted bike racks.
In this article, we are going to discuss how to install all the 3 types of bike racks individually. You don’t need to read all bike rack installation processes. You can navigate to your bike rack type through the table of contents.
Things Discussed In The Article
- How To Install Hitch Bike Rack On Car And SUV?
- How To Install Trunk Bike Rack On Cars And SUVs
- Step 1: Position the Straps of the Rack on Your Trunk
- Step 2: Connect the Straps around Your Car’s Bottom
- Step 3: Make Connection through the Plastic Loops
- Step 4: Join the Top Straps to Each Other on Top of the Rack
- Step 5: Load Your Bikes
- Step 6: Clamp Down Each Leve
- Step 7: Check All Connections and Straps
- How To Install Roof Bike Rack On Cars And SUV’s
- Step 1: Assemble the base plate on the wheel Tray
- Step 2: Screw on the metal stand
- Step 3: Tighten the wheel straps with the bar
- Step 4: Place the rack on the crossbar of the vehicle
- Step 5: Insert the U -Bolts
- Step 6: Place the bike on the rack
- Step 7: Trap the bike
- Step 8: Double-check all the connection
How To Install Hitch Bike Rack On Car And SUV?
Installing a bike hitch rack becomes simple and easy if you have the required tools and know the correct way of installation.
Step 1: Inspect The Hitch Receiver
Not all vehicles have a hitch receiver for adding extendable racks behind. But most SUVs and Trucks have pre-installed hitch receivers. If your vehicle has a hitch receiver, inspect the size and type.
Most hitch receivers are classified into Class1-5 hitch receiver types. And the hitch racks come in clas 2-4 type. Thus, get the most compatible hitch rack according to the receiver type.
Step 2: Mounting the Hitch Rack
Most hitch racks are made with an automated spring lock mechanism. Align the hitch and insert the hitch rack inside the receiver till the lock holes are visible.
Step 3: Locking The Hitch Rack
Inter the bolts and washers inside the hole through the hitch and receiver. Use the socket or wrench to tighten up the bolt in place.
Step 4: Adjusting The Loading Arms And Stabilizing
You can open the security pins and adjust the loading arms according to your demand. It can also be used to get access to the back door. Reinsert the security pins in place after you have adjusted the arms.
Step 5: Loading The Bikes
If you have only one bike to transport, you should place it in the innermost loading area of the rack. Use the integrated securing methods such as Velcro or rubber tie downs. Adjustable clamps are also used in some hitch racks for securing the bike.
Here’s A Detailed Guide: How To Install Hitch Bike Rack?
How To Install Trunk Bike Rack On Cars And SUVs
Let’s now move on to the step-by-step guide on properly installing your trunk-mounted bike rack so there won’t be any wobbles or damage to your car.
Step 1: Position the Straps of the Rack on Your Trunk
The first step is to place the straps over the trunk of your car. The straps must be placed loosely and flat on the top of the trunk to avoid blocking any part of your rear window or blind spot. You’ll want to make sure that there are no twists in these straps as well.
Next, you’ll need to find a center point for your rack. This will help you determine how far apart each set of hooks should be when installing it later on in this process.
Step 2: Connect the Straps around Your Car’s Bottom
Now it’s time to connect the straps around the bottom of the car. Bring one end of each strap around a side of your vehicle and connect it to its counterpart at each end with an adjustable buckle or clip.
You’ll want to run these through as many points on your car as possible so there’s little movement in your rack when you’re driving.
Step 3: Make Connection through the Plastic Loops
Two straps need to be connected through the plastic loops on each side of your car.
First, put one strap through the loop from front to back and pull it tight. Then, pass another strap through from back to front and pull it tight.
Connect these two straps by looping them together with a clove hitch knot. If you don’t have any available on your rack, you can use a binder clip or other heavy object as an anchor point for your bungee cord.
Finally, make sure that all connections are secure by pulling until there is no slack in any part of the rack’s mounting points or straps.
Step 4: Join the Top Straps to Each Other on Top of the Rack
Take the two top straps and attach them to each other on the rack’s top. You can use these in conjunction with a lock or an additional cable lock for added security if you wish.
Make sure that you attach these to their appropriate loops—the shorter straps should go through the smaller loops on the side, while the longer ones should be run through the larger loops on top. Once all of your straps are secure, you’re ready to load up your bike.
Step 5: Load Your Bikes
Check the instructions for your bike rack, as it may differ for different models.
Place one tire inside each V-shaped cradle and pull the other tire into place behind it so that the bike’s frame is touching both cradles with no gap between it and the rack’s bars.
Secure your bikes with a locking cable (if provided) by looping it through each wheel, around the handlebars, and back through itself at least twice before locking tightly together with a key or combination lock; this will help prevent theft.
Step 6: Clamp Down Each Leve
Clamp each lever down the sides until it’s tightened around the bike frame. These levers will keep your bikes from moving while you’re driving, so make sure they’re tight enough that there’s no give when you try to wiggle the bike.
Step 7: Check All Connections and Straps
Before heading out on your journey, it’s essential to check all of your rack’s connections and straps one last time to ensure that everything is secured tightly.
You can test out by safely driving up to 50 kilometers per hour for about 15 minutes, ensuring that there are no rattling noises or loose parts. If you notice any part of the rack wobbling or moving, stop and adjust until it’s snugly fit and tight.
Now that you know how to install a trunk-mounted bike rack, you’re ready to hit the road with your bikes in tow!
Here’s A Detailed Guide: How To Install Trunk Bike Rack?
How To Install Roof Bike Rack On Cars And SUV’s
The installation process is simple and can be completed by yourself. However, because different rack styles have different installation processes, always choose the simplest one to avoid any additional hassle.
Here, I’ll walk you through the simple step-by-step process of installing the roof bike rack. We assume that you have preinstalled mounting points or crossbars to secure bike racks.
Step 1: Assemble the base plate on the wheel Tray
Before beginning the installation procedure, try to assemble everything that you need, such as spacer volts, metal base plates, and other parts.
The first step in making the rack is to use the spacer bolts to secure the metal base plates to the wheel tray.
Step 2: Screw on the metal stand
After the metal base plate has been placed on the wheel tray, Take the metal stand and screw it to both ends of the base plate. Ensure that you can lift the metal stand vertically.
Step 3: Tighten the wheel straps with the bar
Pull the wheel strap through the tire stopper first, then tighten the pasta bar’s front and rear ends. And then, place the bar end cap on both sides to keep the strap from coming out.
So far, the rack has been successfully assembled. Now tit’se to attach the rack wiits the car’s preinstalled crossbar before loading the bike onto the rack.
Step 4: Place the rack on the crossbar of the vehicle
Now we will place the rack on the crossbar. It involves a few steps:
Before placing the bike rack on the vehicle’s crossbar, insert and slide the long carriage bolts through the bike rack.
Place the metal base plate beneath the long carriage bolts and crossbars. Then use a spacer to screw on the mounting bolts beneath the base plates and tighten it.
Step 5: Insert the U -Bolts
Insert the U-bolts on the left and right sides of the bar and secure them with the tri-wing nuts. Finally, make sure the bike rack is stable and secure.
Step 6: Place the bike on the rack
Since our bike rack is ready, it’s time to place the bike on the rack, and make sure the bike is parallel to the traveling direction of your vehicle. Pull the straps through the spokes of the wheel and tighten.
Step 7: Trap the bike
After you’ve secured the bike to the rack, Raise the rack arm to catch the bike’s lower tube.
Insert the hex bolts into the arm and slide a tension screw between the arms. One hex bolt is for the upper part, while the other is for the lower part.
Place the black knobs on the bolts and tighten them in place by turning them clockwise. Finally, lock the upper block knob with the key.
Step 8: Double-check all the connection
After you have done everything nice and smooth, double-check all the connections. The rack should hold the bike tightly.
Here’s A Detailed Guide: How To Install Hitch Bike Rack?